New and Used Office Furniture in North Carolina (cont'd)

Have an inch of threads and one- inch base. For replacing existing 1/4- 20 levelers on tables and chairs when maximum protection of floors is desired. Felt and plastic are permanently bonded.   (item #2517)

Storwal Plate Dividers  (item #2021)

Side-to-side Lateral File hangrails for Models 500, 600, 700 and 800 Series are being enhanced to match the hangrail introduced with the 9000 Series in April, 1994. The hangrail tabs that protrude through the drawer sides have been expanded to the full length of the hangrail to increase the hangrail's strength. Additionally, the slot in the drawer side changes to accommodate this new design. The old side WILL NOT fit units produced after this change is made and new hangrails will not fit in units produced prior to this change.   (item #2014)

New Magical File Clip. Features: A new and economical method of installing hanging file systems in wooden file drawers.   (item #2977)

Cole Lateral File Bar Available for cabinets 30", 36" and 42" Wide Cole Front to back File Rail   (item #7635)

Mobile Folding Coat Racks provide flexibility in handling large numbers of coats on an intermittent basis without committing wall or floor space to coat storage. These are a very popular choice for rental, hospitality, meeting &convention uses. Our Coat Racks accommodate large numbers of coats, then fold and store until needed again. All our Mobile Folding Coat Racks use 3" diameter swivel casters (2 with brake, 2 without brake) for easy relocation across thresholds and other uneven surfaces. Two models to choose from-Model VR-6R & VR-6RD.   (item #3523)

complete kit ready to install Fits HON Lateral Files with Oval (Double D) cutouts does not fit files with round cutouts   (item #2044)

Maple/Chrome "Fixtures" Used Training Tables 3- 18x72 Folding Training Tables  (item #7374)

Meridian Label Holder for Herman Miller Meridian Lateral Files Size : 4" wide x 1" High Clear heavy duty plastic  (item #3272)

Drawer Locks Type A and Type B  (item #2040)

For sled base horizontal pipe chairs. Just remove existing clips. Look for 1/4" holes and gently tap in place. May also be used in wooden cross- grain applications by drilling quarter- inch hole. Felt and plastic are permanently combined. White only.  (item #2515)

Magical File Clip Features: A new and economical method of installing hanging file systems in wooden file drawers. Part # 4264 Clip  (item #3268)

Original Storwal Clear Plastic Label Holders  (item #2020)

Handed and non handed enclosure locks Latch-No Key and Key operated available   (item #2038)

Side Rail Safety Clip For use with Unigroup or Places panel cores to lock side rail.  (item #2888)

Tubular Steel Table Legs 60mm-23/8" Dia. 80mm-31/8" Dia. Adjustable Height -overall 28" to 29" Mounting Screws Included. Sold 4 legs per box only. In stock for quick delivery. Available in: Black, White, Almond Krinkle, Powder Coated Bright Chrome Plated 60mm-23/8" Dia. $12.25 each 80mm-31/8" Dia. $16.00 each   (item #2726)

Ultimate Stacking Chair is an affordable, lightweight chair for all of your mass seating needs. Plastic ganging clips make it a cinch to set up organized rows of chairs for presentations, and they keep chairs neatly arranged even as you audience shifts around the room. The textured, contoured polypropylene seat and back offer comfort and style, while the sturdy solid steel frame provides plenty of support year after year. Stacks up to 47 chairs. The plastic ganging clips also act as glides to protect your floors from damage. Designed to hold up to 300 lbs.   (item #4459)

Steelcase Wrench for Hinge Removal and Glide adjustment. Steelcase Series 9000, Steelcase Valencia and Steelcase Avenir.   (item #3103)

Lines Drawer In Between! MAGNETIC FILE DRAWER FOLLOWERS / MAGNETIC FILE DIVIDERS Maintain order! Magnetic followers can be used in steel file cabinets and boxes not equipped with mechanical followers. Use wherever extra dividers are needed. Model FF34 - 3 1/2" x 4" x 2" base --> $8.50 Model FF46 - 4 1/2" x 4 1/2" x 2" base --> $12.00 Model FF85011 - 7 1/2" x 9" x 5" base --> $13.50  (item #2002)

Wheel Covers with "Scratch Guard" for hard Wheel Casters on Hard Floor Surfaces recommended for: Hardwood, Linoleum, Finished Concrete, Laminate and more. One size fits most 1-3/4"-2-1/8" diameter Dual Wheel Casters. Protects floors from wheel damage. Installs in seconds. No Tools required. These Wheel Covers reduce scratches, nicks, gouges and scrapes on all hard wood surfaces. Tested on VCT Tiles. Part # 87009 Contains: 10 Charcoal Colored 1-3/4" Wheel Covers.   (item #2709)